Reinforcing steel mesh

Reinforcing steel mesh ISO9001 material:low carbon steel wire wire dia:4-12mm hole pitch

Name:Reinforcing steel mesh

Welded mesh reinforcing is a convenient and cost effective alternative to conventional bar reinforcement for the following reasons :

The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management. The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process.

Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls.

RMS is one of the few manufacturers of welded mesh in Southern Africa, which has a full SANS 9001 : 2000 quality rating. The manufacture process is as follows:

Mittal Steel supply RMS with medium-low carbon mild steel rod The mild steel rod is cold rolled by RMS to the required diameter to form high tensile wire The high tensile wires are welded into a rectangular mesh grid fabric

specification	silk diameter (mm)	net hole(mm)	net weight (kg)
1MX2M	1.80	50X50	1.7
1MX2M	1.90	50X50	1.9
1MX2M	2.00	50X50	2.1
1.2MX2.4M	1.80	50X50	2.45
1.2MX2.4M	1.90	50X50	2.73
1.2MX2.4M	2.00	50X50	3.02
1.2MX3M	1.80	50X50	3.02
1.2MX3M	1.90	50X50	3.37
1.2MX3M	2.00	50X50	3.73
1.25MX6M	1.80	50X50	6.38
1.25MX6M	1.90	50X50	7.13
1.25MX6M	2.00	50X50	7.87
1.5MX6M	1.80	50X50	7.65
1.5MX6M	1.90	50X50	8.55
1.5MX6M	2.00	50X50	9.45
Note:The special specification may make to order.

Reinforcing steel mesh